
Integrated ARGB case fan with a 4-sided infinity mirror and a 3D zigzag light strip, as a one-piece 360mm triple fan or a single 120mm, with forward or reverse blades.
SKU: Matrix-Pro-360-F-BLACK
Size · 360mm
Color · Black
Blade · Forward
The AsiaHorse Matrix Pro is an integrated ARGB case fan wrapped in a 4-sided infinity mirror, with a continuous 3D zigzag light strip running across the frame. Pick the 360mm version, three 120mm fans moulded into one linked frame that installs as a single piece, or the single 120mm fan for one slot. Each fan spins from 800 to 2000 RPM for up to 68.78 CFM, which makes the Matrix Pro a strong pick in Pakistan for a showcase PC behind tempered glass.
Both sizes share the same infinity mirror styling, three-zone strip, blade choice and per-fan rating of 800 to 2000 RPM, 68.78 CFM and 2.6 mmH₂O. The 360mm joins three fans in one rigid, gapless frame: one install, one continuous light run, made for a 360mm radiator or a row of three 120mm fan mounts. The 120mm is a single fan for a rear exhaust, a 120mm radiator or any spare slot next to the 360mm.
The Matrix Pro suits panoramic and dual-chamber cases where the fans sit in plain view, and AIO builds that want the radiator to be part of the show. Pair the 360mm with the 120mm to give the whole case one matching look.
Not to light it up: the 5V 3-pin ARGB plug works with any motherboard 5V 3-pin ARGB header, so your board's RGB software, such as ASUS Aura Sync, MSI Mystic Light or ASRock Polychrome, can run it. The Umbra hub and its UMBRA software add separate control of the three zones and AsiaHorse's full custom effects.
Pick the blade by the airflow direction each fan position in your case needs. The blade only changes the airflow direction; the lighting design is the same on both, so a mix of forward and reverse fans still gives one matching look.
It needs a straight mount for three 120mm fans in a row, such as a 360mm radiator or a 360mm top, side or front position. Because the three fans are one rigid piece, check that your case has a continuous 360mm mount; for split or offset slots, the single 120mm is the flexible choice.
AsiaHorse rates it at 17.3 dB(A) at the low end and 31.6 dB(A) at full speed, with PWM control letting your motherboard or the Umbra hub keep it near the quiet end at idle.
Black and White are available on this page in 360mm and 120mm, each with forward or reverse blades. Order online from OJ Tech for delivery to Lahore, Karachi, Islamabad and everywhere in Pakistan.
| Spec | Value |
|---|---|
| Fan size | 360mm integrated (3×120mm linked) or single 120mm |
| Lighting | 3-zone ARGB · 3D curved infinite-mirror (4-sided) |
| ARGB presets | 100+ (needs AsiaHorse Umbra Hub, sold separately) |
| Blade options | Forward / Reverse airflow |
| Fan speed | 800-2000 (+10%) RPM, PWM |
| Airflow | up to 68.78 CFM |
| Static pressure | 2.6 mmH₂O |
| Noise | 17.3-31.6 dB(A) |
| Bearing | Hydraulic (20,000+ h lifespan) |
| Connectors | 4-pin PWM + 5V 3-pin ARGB |
| Frame | Low-resistance 2-support (over 50% less airflow resistance) |
| Lighting sync | Any motherboard 5V 3-pin ARGB header (e.g. ASUS Aura Sync, MSI Mystic Light, ASRock Polychrome); 3-zone control via AsiaHorse Umbra hub |
these fans are amazing. gives you TONS of light control and fan speed control. they look super clean and are in my opinion a better option than Lian Li
Sammer · 05-Nov-2026