
AsiaHorse CosmiQ single 120mm ARGB PWM fan with an infinity mirror centre, 68.5 CFM and a quiet FDB bearing. Add one to a CosmiQ setup or replace a tired case fan.
SKU: Cosmiq-Forward-Black-1pack
Color · Black
Blade · Forward
Add one more fan, or swap out a stock fan that has started to rattle, with the AsiaHorse CosmiQ single, a 120 mm ARGB PWM fan with an infinity mirror centre and lit frame accents. It is rated at 68.5 CFM from 800 to 2000 RPM, and its FDB (fluid dynamic bearing) motor keeps noise under 29.2 dB(A) even at full speed. It is an easy way to add AsiaHorse lighting to a build in Pakistan one fan at a time.
The single is for growing or fixing a setup you already have: add a rear exhaust behind a CosmiQ front intake, swap out one fan that has failed, or light up a small case that only needs one or two fans. It takes its lighting and speed signal straight from your motherboard, so there is nothing extra to install.
The fan itself is identical. The difference is what comes with it: the 3-Pack adds an RGB controller with a sound pickup for 8 music rhythm modes, so it can run the lighting without a motherboard ARGB header. The single has no controller, so it needs a 5V 3-pin ARGB header or a 5V ARGB hub for its lighting.
No. The controller and its music sync modes come with the CosmiQ 3-Pack. The single runs from a 4-pin PWM fan header and a 5V 3-pin ARGB header on your motherboard, or from a 5V ARGB hub.
Yes. It is the same CosmiQ fan with the same interlocking connectors, offered in the same Black and White finishes with Forward or Reverse blades.
AsiaHorse recommends Forward blades for front, rear and top case mounts, radiators and CPU air coolers. Reverse blades are meant for bottom and side mounts that draw in fresh air, and also suit CPU air coolers.
A fluid dynamic bearing spins the shaft on a thin film of oil, which cuts friction and wear. On the CosmiQ it keeps noise under 29.2 dB(A) even at 2000 RPM.
No dedicated app is needed. Lighting follows your motherboard's ARGB software, such as Aura Sync, Mystic Light, RGB Fusion 2.0 or Polychrome, and speed follows the BIOS fan curve.
Choose Black or White with Forward or Reverse blades on this page. Order online from OJ Tech for delivery to Lahore, Karachi, Islamabad and every city across Pakistan.
| Spec | Value |
|---|---|
| Model | AsiaHorse CosmiQ 120mm ARGB PWM fan |
| Size | 120mm |
| Airflow | 68.5 CFM |
| Static pressure | 2.05 mmH2O |
| Speed | 800 to 2000 RPM ±10%, PWM |
| Noise | Under 29.2 dB(A) at full speed (2000 RPM) |
| Bearing | FDB (fluid dynamic bearing) |
| Lighting | ARGB, infinity mirror, 16.7 million colours |
| Connectors | 4-pin PWM + 5V 3-pin ARGB, interlocking fan-to-fan daisy-chain |
| Control | Motherboard ARGB sync software (5V 3-pin) or the CosmiQ controller (sold with the 3-pack) |
| Lighting sync | Any 5V 3-pin ARGB header, for example ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion 2.0, ASRock Polychrome |
| Blade | Forward or reverse |
| Colours | Black, White |
Genuine and authentic seller, got my first premium good airflow fans, had id-cooling first. so far good fans. If these fans came with independent ARGB zones (to customize inner and outer zones) then it would be great.
Anonymous · 11-Sept-2026