An 850W fully modular 80 PLUS Gold ATX 3.1 PSU with Lian Li's L-shaped design, a 12V-2x6 GPU cable and a 0 RPM fan mode, supplied without the EDGE Hub V2.
The EDGE Gold V2 850W (EG0850C) is a fully modular ATX 3.1 power supply built on Lian Li's signature L-shaped chassis, which turns the cable connectors outward so routing stays clean and organised in dual-chamber cases. Triple Gold certification from 80 PLUS, Cybenetics and PPLP keeps it efficient, and a dual-colour 12V-2x6 cable connects straight to a current graphics card, with three PCIe 8-pin (6+2) cables included for cards that use standard connectors.
A 120mm FDB fan behind an open mesh grille handles cooling, and the fan on/off switch lets it stay at 0 RPM during light loads for quieter everyday use, ramping up only as power demand rises. A premium Japanese bulk capacitor supports stable output, a detachable magnetic dust filter makes routine cleaning simple, and the complete modular cable set is long enough for regular tower cases as well as dual-chamber builds.
This 850W model comes without the EDGE Hub V2 USB and fan controller, so it suits builds where fans and USB devices already run from the motherboard or a separate controller.
| Spec | Value |
|---|---|
| Wattage | 850W |
| Efficiency | 80 PLUS Gold / Cybenetics Gold / PPLP Gold |
| Modularity | Fully modular |
| Model | EG0850C (EG0850G V2) |
| Form Factor | ATX (L-shaped) |
| ATX Specification | ATX 3.1 |
| GPU Connector | 1x 12V-2x6 cable with dual-colour connector, rated 450W (600mm) |
| Motherboard Cable | 1x 24/20-pin (600mm) |
| CPU Cables | 1x 8-pin EPS and 1x 4+4-pin EPS (700mm each) |
| PCIe Cables | 3x 8-pin (6+2) (550mm) |
| SATA / Molex Cables | 1x 4-SATA, 1x 3-SATA + Molex, 1x Y-type 4-SATA |
| +12V Output | 70.8A (849.6W) |
| +3.3V & +5V Combined | 100W (20A each) |
| AC Input | 100-240Vac, 10-5A, 50-60Hz |
| PFC | Active PFC, PF > 0.90 at full load (115Vac, 60Hz) |
| Cooling | 120mm FDB fan, 2000 RPM, fan on/off switch for 0 RPM mode at low loads |
| Capacitor | Japanese bulk capacitor |
| Dust Filter | Detachable magnetic dust filter |
| EDGE Hub V2 | Not included |
| Protections | OCP, OVP, OTP, OPP, SCP, UVP, SIP, NLP |
| Material | Steel |
| Dimensions | 86(W) x 150(H) x 182(D)mm |
No reviews yet. Be the first to review this product.
